If you are new to Burp and are having problems, please first read the Support Center articles on Getting Started with Burp Suite and Installing and Configuring Burp. Otherwise, the problems and solutions below might help you.
1. Burp doesn't run.
Make sure you have a suitable version of Java installed. Then start Burp from the command line. Look at any error messages or other output that appears on the command line, which should indicate the cause of the problem.
2. I get an error message saying NoClassDefFoundError.
When running Burp from the command line, make sure you have included the -jar argument followed by the location of the Burp JAR file. If you're still having problems, check that your command is launching the correct version of Java. Run the command java -version and confirm that the version being executed is 1.6 or later. If you have installed a later version of Java but an older version is still being executed, then replace "java" with an absolute path to the correct java executable on your system. If you're still having problems, your Java installation might be corrupted, so reinstall it.
If you get this error message when trying to launch Burp with a Burp Extender plugin, then check that your BurpExtender class is declared in the burp package, and resides inside a folder called burp within your extension's JAR file.
3. I've unpacked the Burp JAR file. What next?
You don't need to unpack or unzip the Burp JAR file. This probably happened because your computer is associating the .JAR file extension with some unarchiving software. You can change this association to associate with Java, or better, you can start Burp from the command line.
4. My browser can't make any requests.
If your browser is always waiting and not showing any actual content, then please try the following steps. After each step, check whether you are still having problems, and only continue to the next step if things are not working.
In Burp, go to the Proxy tab, and the Intercept sub-tab. If this is showing an intercepted HTTP request, then turn off interception (click on the "Intercept is on" button to toggle the interception status). Your browser should now work as normal. See Getting Started with Burp Proxy for more help on the basics of using Burp Proxy.
Try visiting another domain with your browser (ideally a well-known public domain). If this works, then the problem might relate to the specific web site you originally visited.
Go to the Proxy tab, and the Options sub-tab. In the Proxy Listeners section, the table should show at least one entry where the Running checkbox is checked. If this is unchecked, try to check it. If the box cannot be checked, and the Alerts tab shows a message saying "Failed to start proxy service" then Burp is not able to open the specified port and interface. This is often because the port is in use by another process. Select the item in the table, click the "Edit" button, and change the port number to a different one. Click "OK" and see whether the listener can now be enabled. You may need to try a few different ports, or query your computer's configuration to locate an available port. Then proceed to the next step to update your browser's proxy configuration with the new port number.
Check that your browser's proxy settings are correctly configured, and are using the same IP address and port number as configured in a running Proxy listener (in Burp's default settings, this is IP address 127.0.0.1 and port 8080, though it may be different in your current configuration). For further details, see Configuring Your Browser.
In Burp, go to the Options tab, and the Connections sub-tab. In the "Upstream Proxy Servers" section, confirm whether any upstream proxies are configured, and if so whether these settings are correct for your network's setup.
Make some more requests from your browser (e.g. press refresh a few times). Look in the Alerts tab to see if any new entries are being generated. If so, these entries might indicate the cause of the problem.
Go to the Burp menu, and select "Restore defaults" for all options. Then close Burp down gracefully by selecting "Exit" from the Burp menu. Start Burp again. Shut down all your browser instances, and then open a new browser window.
5. Burp isn't intercepting anything.
In Burp, go to the Proxy tab, and the History sub-tab. Make some more requests from your browser (e.g. press refresh a few times), and check whether any new entries are appearing in the Proxy history. If so, then Burp is processing your browser traffic but is not presenting any messages for interception. Go to the Proxy Intercept tab, and enable master interception (click on the "Intercept is off" button to toggle the interception status). Then go to the Proxy Options tab, and click the "Restore defaults" button in the "Intercept Client Requests" and "Intercept Server Responses" sections. Make some more requests from your browser, and these should now appear in the Proxy Intercept tab.
If your browser is loading pages correctly but no items are appearing in the Proxy history, you need to check your browser proxy settings. Your browser should be configured to use Burp for both HTTP and HTTPS; any "automatic" proxy options should be disabled, and any "exceptions" to the proxy settings should be removed. If you are unsure, follow carefully the steps in Configuring Your Browser to ensure your browser is correctly set up.
6. Burp isn't intercepting HTTPS requests.
If your browser is sending HTTP requests through Burp, but not HTTPS requests, then your browser is probably configured to proxy only HTTP. Check in your browser proxy settings that the browser is configured to use Burp for both protocols. If you are unsure, follow carefully the steps in Configuring Your Browser to ensure your browser is correctly set up.
7. HTTPS websites don't work properly.
If your browser is able to load HTTPS websites via Burp, but these do not function properly (e.g. the user interface is not complete or fully functional), then the application is probably attempting to load script code or other resources over HTTPS from another domain, and your browser is generating a security alert when loading these resources via Burp. You need to install Burp's CA certificate in your browser, to ensure that applications using HTTPS function properly.
8. I get authentication failures when using Burp.
If the application you are testing uses platform authentication (which normally shows as a popup login dialog within your browser), and you get authentication failure messages when your browser is configured to use Burp, then you need to configure Burp to handle the platform authentication instead of your browser. Go to the Options tab, and the Connections sub-tab, and the Platform Authentication section. Add a new entry for each hostname used by your application, configuring the authentication type and your credentials. If you aren't sure of the authentication type, then first try NTLMv2, then NTLMv1, and then the other types. You may need to close all browser windows and open a new browser window, to prevent any browser caching from interfering with the authentication process.
9. Burp runs out of memory.
Burp is constrained by the amount of memory that your computer makes available to the Java process. You can request additional memory for Burp by starting Burp from the command line using the -Xmx argument. See Launching Burp for more details.
10. How do I run a scan?
Burp is designed to be used in a user-driven manner, to support the process of testing an application using hands-on techniques. Conventional web scanners, which attempt to fully automate the scanning process, have inherent limitations which mean they provide incomplete coverage. If you want to use Burp as a conventional scanner, and fully automate the scanning process, see Using Burp as a Point-and-Click Scanner.
11. I cannot route traffic from mobile devices to Burp.
This issue could be due to your computer's firewall rules. Ensure that they are configured to allow connections from your mobile device.
Also, see the Support Center articles on configuring mobile devices to work with Burp.
12. I am encountering scaling issues on Windows 10 between my 4k and normal screens, particularly when trying to drag between them.
Try starting Burp Suite with these settings: start javaw -Dsun.java2d.d3d=false -Dsun.java2d.noddraw=true -jar burpsuite_pro_v1.7.23.jar.